Kramer-electronics RC-IR2 Manual do Utilizador descarregar pdf (Página 12)

The Router Mode Keys

7.2 Initializing the RC-IR2

Table 2 describes the initializing sequence:

Table 2: RC-IR2 Initializing Sequence

Press To IR LED

Behavior on

the Switcher

Front Panel

See

Section

<-> Select single digit ON and then OFF

7.3.1

ROUTER Select the machine number ON 7.2.1

1 or other Set the machine number OFF

Group Select the Group number ON 7.2.2

12 or 11 (if the switcher

has one output only

) or

other for old protocols

Set the Group number OFF

AFV/VIDEO/AUDIO Select AFV to control both video and audio

Select VIDEO to control only video

Select AUDIO to control only audio

Briefly blinks

<- -> If the controlled switcher has more than 20

inputs/outputs select double digit

ON and then OFF

7.3.1

7.2.1 Assigning the ROUTER Number

To assign the switcher’ s machine number to the RC-IR2, do the following:

1. Point the remote control transmitter at the remote receiver and press the

ROUTER key.

2. Press the digit corresponding to the machine number

This sets and saves the ROUTER number on the RC-IR2.

The assigned machine number must always be identical to the setting on the

machine

7.2.2 Assigning the GROUP Number

After assigning the ROUTER number, you have to assign the GROUP number

To assign the GROUP number to a unit, do the following:

1. Point the remote control transmitter at the remote receiver and press the

GROUP key.

2. Press the digit corresponding to the number of the Group

This sets and saves the group number.

1 The group 11 machines are protocol 2000 switchers that have only one output, so that the output is preset to 1 and you only

have to press the input number digit on the selector buttons

2 The machine number set up on the unit (for example, via the DIP-switches)

3 According to the specifications in Table 3

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Comentários a estes Manuais

Sem comentários

Kramer-electronics RC-IR2 Manual do Utilizador Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Painel de controlo Kramer-electronics RC-IR2