Kramer-electronics RC-78R Manual do Utilizador

KRAMER ELECT RONIC S LTD. USER MANUAL MODEL: RC-76R/RC-78R Room Controllers P/N: 2900-300253 Rev 2

RC-76R/RC-78R - Connecting the RC-76R/RC-78R 7 4 Connecting the RC-76R/RC-78R Always switch off the power to each device before connecting it to

8 RC-76R/RC-78R - Connecting the RC-76R/RC-78R Figure 2: Connecting the RC-76R/RC-78R Room Controllers 4.1 Connecting RS-232 Devices You can contr

RC-76R/RC-78R - Connecting the RC-76R/RC-78R 9  Connect the A (+) pin of the device to the A pin on the RS-485 terminal block of the RC-76R/RC-78R

10 RC-76R/RC-78R - Connecting the RC-76R/RC-78R 4.4 Connecting the K-NET Port The K-NET port is wired as shown in Figure 3. Figure 3: K-NET PINOUT

RC-76R/RC-78R - Connecting the RC-76R/RC-78R 11 To ground the RC-76R/RC-78R: 1. Connect the ring tongue terminal to the building grounding point wi

12 RC-76R/RC-78R - Operating the RC-76R/RC-78R 5 Operating the RC-76R/RC-78R You can operate your RC-76R/RC-78R using:  Front panel buttons. The

RC-76R/RC-78R - Front Panel Button Caps and Labels 13 6 Front Panel Button Caps and Labels The RC-76R/RC-78R are supplied with a button label sheet

14 RC-76R/RC-78R - Front Panel Button Caps and Labels

RC-76R/RC-78R - Front Panel Button Caps and Labels 15 Figure 5: Sample Button Label Sheet

16 RC-76R/RC-78R - Front Panel Button Caps and Labels 6.1 Installing the Front Panel Button Caps and Labels To install the button caps and labels:

RC-76R/RC-78R - Front Panel Button Caps and Labels 17 Figure 7: Button Cap Orientation with Label 6. Retaining the orientation, return each cap t

18 RC-76R/RC-78R - Technical Specifications 7 Technical Specifications INPUTS: 2 RS-232, 1 RS-485, 1 GPI/O and 1 K-NET on terminal block connectors

For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may

RC-76R/RC-78R – Contents i Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 2.2 Safety Instructions 3 2.3

RC-76R/RC-78R - Introduction 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, c

2 RC-76R/RC-78R - Getting Started 2 Getting Started We recommend that you:  Unpack the equipment carefully and save the original box and packagin

RC-76R/RC-78R - Getting Started 3 2.2 Safety Instructions Caution: There are no operator serviceable parts inside the unit Warning: Use only the K

4 RC-76R/RC-78R - Overview 3 Overview The RC-76R/RC-78R are highly versatile master room controllers that act as an all-in-one extended remote cont

RC-76R/RC-78R - Overview 5 3.1 Defining the RC-76R/RC-78R Room Controllers This section defines the RC-76R/RC-78R. Figure 1: RC-76R/RC-78R Room Co

6 RC-76R/RC-78R - Overview # Feature Function 11 RESET Button Press to reset to factory default definitions: IP number  192.168.1.39, Mask – 255.2