Kramer-electronics SP-11D Manual do Utilizador descarregar pdf (Página 16)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Operating the SP-11D Digital Video Processor

 Press the + button or – button once to gradually increase or

decrease the current level by one unit (the 7-segment display

shows the new level)

To increase or decrease the current level rapidly, press and hold

down the + button or – button, continuously

Note, if you want to:

. To end the rapid

adjustment, release the + button or – button

• Set the normal level (“NORM”) of the current level, press and

simultaneously hold down both the + button and – button.

The 7-segment display shows “0”

• Undo the adjustment, press the appropriate button one more time. The

appropriate button no longer blinks

• Save the result of the adjustment, press the STORE button twice

• Store the result of the adjustment in another setup #, press the STORE

button once, select a setup # between 1 and 16 by pressing the + and –

buttons, and then press the STORE button once again

If the adjustment is set such that the level setting is at its normal level

(“NORM”), the appropriate button no longer illuminates (otherwise this

button continues to illuminate in the main mode).

7.1 Storing/Recalling Setups

You can store and recall up to 16 setups (or adjustments) in non-volatile

memory, using the STORE and RECALL buttons together with the + and –

buttons.

To store

• Press the STORE button and then select a setup # between 1 and 16 by

pressing the + and – buttons (the current settings are saved to that

setup #)

a setup, do the following:

• Press the STORE button once again

To recall a setup, do the following:

• Press the RECALL button and then select the appropriate # (that

corresponds to the setup #) by pressing the + and – buttons (the

selected setup is recalled)

• Press the RECALL button once again

1 The 7-segment display starts to quickly scan the range. When it stops running, it has reached the maximum or minimum

setting

2 Storing a new setup over a previous setup # replaces the previous setup #

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 22 23

Sem comentários

Kramer-electronics SP-11D Manual do Utilizador Página 16