Kramer-electronics FC-41 Manual do Utilizador descarregar pdf (Página 12)

FC-41 - Connecting the FC-41

Figure 3: Connecting the FC-41 HD-SDI to Component Converter

5.1 Connecting to the FC-41 via RS-232

You can connect to the unit via a crossed RS-232 connection, using for example,

a PC. A crossed cable or null-modem is required as shown in method A and B

respectively. If a shielded cable is used, connect the shield to pin 5.

Method A (Figure 4)—Connect the RS-232 9-pin D-sub port on the unit via a

crossed cable (only pin 2 to pin 3, pin 3 to pin 2, and pin 5 to pin 5 need be

connected) to the RS-232 9-pin D-sub port on the PC.

Note: There is no need to connect any other pins.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 20 21

Sem comentários

Kramer-electronics FC-41 Manual do Utilizador Página 12