Kramer Electronics 1:3 Computer Graphics Video Distribution Amplifier Manual do Utilizador Página 5

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 14
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 4
Overview
3
3 Overview
The Kramer TOOLS VP-200K, VP-300K and VP-400K are 1:2, 1:3 and 1:4
(respectively) distribution amplifiers for UXGA and higher resolution signals.
The VP-200K,
VP-300K and VP-400K accept one input, provide correct
buffering and isolation, and then distribute the signal to two, three or four
(respectively) identical outputs on high-density 15-pin HD connectors.
In particular, the High Resolution UXGA DA:
Has a high video bandwidth exceeding 400MHz, ensuring that it
remains transparent even at high-resolution graphics modes such
as UXGA (1600x1200)
Supports DDC (Display Data Channel) communication between
the input and output 1 high-density 15-pin HD connectors on pins
11, 12 and 15
Supports EDID PassThru that passes EDID signals from source to
display
Includes the Kramer innovative integrated sync processing;
KR-ISP™ technology, which lets you achieve a sharp, stable
image when the sync level is too low, by restoring the sync signal
waveform
Includes an ID Bit control switch as well as polarity switches
Is 5V DC fed and is housed in a DigiTOOLS
®
enclosure
3.1 DDC Support
When establishing a VGA connection between a PC or laptop and a display
device, a set of parameters known as EDID is exchanged between them,
which is carried over the DDC channel. In some PC graphic cards and
laptops, this information exchange is essential for proper VGA OUT
operation.
3.2 Defining EDID
The Extended Display Identification Data (EDID
1
1 Defined by a standard published by the Video Electronics Standards Association (VESA)
) is a data-structure,
provided by a display, to describe its capabilities to a graphics card (that is
connected to the display’s source). The EDID enables the PC or laptop to
“know” what kind of monitor is connected to the output. The EDID
includes the manufacturer’s name, the product type, the timing data
supported by the display, the display size, luminance data and (for digital
displays only) the pixel mapping data.
Vista de página 4
1 2 3 4 5 6 7 8 9 10 ... 13 14

Comentários a estes Manuais

Sem comentários