Kramer-electronics VM-12HDCP Manual do Utilizador descarregar pdf (Página 10)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting a VM-12HDCP 1:12 DVI Distributor

6 Connecting a VM-12HDCP 1:12 DVI Distributor

To connect the VM-12HDCP as illustrated in the example in Figure 2, do

the following

1. Connect a DVI source (for example, a computer) to the INPUT connector.

2. Connect up to 12 OUTPUT connectors

 OUTPUT 1 connector to DVI acceptor 1 (for example, a

projector)

to up to 12 DVI acceptors. For

example, the:

 OUTPUT 12 connector to DVI acceptor 12 (for example, a

display)

3. Connect the power cord to the mains electricity (not shown in

Figure 2).

To use the VM-12HDCP, do the following:

1. Turn ON the POWER.

2. Acquire the EDID (see section

7).

1 Switch OFF the power on each device before connecting it to your VM-12HDCP. After connecting your VM-12HDCP,

switch on its power and then switch on the power on each device

2 Not all the outputs need to be connected

1 2 ... 5 6 7 8 9 10 11 12 13 14 15

Sem comentários

Kramer-electronics VM-12HDCP Manual do Utilizador Página 10