Kramer-electronics VM-1055 Manual do Utilizador descarregar pdf (Página 15)

VM-1010, VM-1021, VN-1055, VM-54 - Your VM-1021 13

Note:

• Terminate unused inputs to 75, and terminate active inputs at the

connecting source

• Remember, the output signal format matches the input signal format (for

example, if the input is composite, the output is composite)

• All signal cables to each device should be of equal length (for example, the

R,G,B cables between a camera and the amplifier should be of equal length)

5.3 VM-1021 Technical Specifications

INPUT: 1 composite video or a single component, looping,

1Vpp/75 on BNC connectors with termination switch

OUTPUTS: 20 composite/component video, 1Vpp/75 on BNC

connectors

VIDEO BANDWIDTH(-3DB): 350MHz

DIFF. GAIN: 0.1%

DIFF. PHASE: 0.07Deg

K-FACTOR: <0.05%

VIDEO S/N RATIO: 74dB

CONTROL: Level: -1.1dB to + 2.7dB; EQ.: 0 to 2.9dB @4.4MHz

NON-LINEARITY: 0.1%

COUPLING: AC, DC, and clamped - user selectable with front panel

switches

DC CLAMP: 0V DC black level, or sync tip

POWER SOURCE: 230V AC, 50/60Hz (115V USA), 6.7VA

OPERATING

TEMPERATURE:

0° to +55°C (32° to 131°F)

STORAGE TEMPERATURE: -45° to +72°C (-49° to 162°F)

HUMIDITY: 10% to 90%, RHL non-condensing

DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable

WEIGHT: 2.6kg (5.7lbs) approx.

ACCESSORIES: Power cord

Specifications are subject to change without notice at http://www.kramerelectronics.com

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 26 27

Sem comentários

Kramer-electronics VM-1055 Manual do Utilizador Página 15