Kramer-electronics 2x1 VGA Switcher PT201VGA Manual do Utilizador descarregar pdf (Página 5)

Using the PT201VGA 2x1 VGA Switcher

5 Using the PT201VGA 2x1 VGA Switcher

Since the unit is passive, you can connect your PT201VGA as a 2x1 VGA

switcher (see section 5.1) or as a 1x2 VGA switcher (see section 5.2).

5.1 Connecting the PT201VGA as a 2x1 VGA Switcher

To use your PT201VGA as a 2x1 VGA switcher, connect the 2 VGA

INPUTS, as the example in Figure 2 illustrates:

1. Connect up to 2 VGA sources to the INPUT HD15F connectors, as

follows:

 A VGA source (for example, a PC “Source 1”) to INPUT 1

 A VGA source (for example, a PC “Source 2”) to INPUT 2

2. Connect the HD15F OUTPUT connector to the VGA acceptor (for

example, a monitor).

3. Push in the SELECT switch to route input 1, or release it to route input 2.

Figure 2: Connecting the PT201VGA 2x1 VGA Switcher

5.2 Connecting the PT201VGA as a 1x2 VGA Switcher

To use your PT201VGA as a 1x2 VGA switcher

, as the example in Figure 3

illustrates, connect as follows:

1 Due to its passive signal path, the PT201VGA can also operate in the opposite direction

1 2 3 4 5 6 7 8

Sem comentários

Kramer-electronics 2x1 VGA Switcher PT201VGA Manual do Utilizador Página 5