Kramer-electronics VP-774AMP Manual do Utilizador descarregar pdf (Página 34)

VP-774AMP - The OSD Menu

Figure 20: Set the Output Volume Level

6.3.1 SDI Channeling

SDI channeling includes four groups with two stereo channels each. Two of the

groups are always connected and the other two disconnected. You can select (via

the OSD) one of the eight SDI embedded stereo audio channels, together with

three bypassed channels, to be routed to the input of a connected machine with

SDI audio channels (for example, the Kramer 6810HDXL SDI/HD−SDI/3G Audio

Embedder/De−embedder, or the Kramer 6809HD HD/SD-SDI AES Embedder).

Within the two connected groups, one channel can be activated and

the remaining three channels are bypassed. The acceptor device

will input the channels as follows: the active channel is input as

Group A, CH1; the bypassed channel in the same group is input as

Group A, CH2; the two remaining bypassed channels are input as

Group B CH1 and CH2.

In the example illustrated in Figure 21, channels C and D are disconnected and

channels A and B are connected (CH1 and CH2 in group A are bypassed, CH1 in

group B is bypassed and CH2 in group B is active).

These channels are input to the Kramer 6810HDXL, processed and output to an

audio acceptor:

 The group B active CH2 signal is input as Group A, CH1

 The group B bypassed CH1 signal is input as Group A CH2

 The group A bypassed CH1 signal is input as Group B CH1

 The Group A bypassed CH2 signal is input as Group B CH2

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 84 85

Sem comentários

Kramer-electronics VP-774AMP Manual do Utilizador Página 34