Kramer-electronics VP-441 Manual do Utilizador descarregar pdf (Página 19)

VP-441 - Controlling the VP-441

Parameter

Function

HDMI AUDIO IN

Select:

AUTOMATIC: the embedded audio on the HDMI input is selected for an

HDMI signal, or the analog audio input is selected if the input is not

HDMI (for example, for a DVI input signal)

EMBEDDED: the embedded audio in the HDMI signal is selected

ANALOG: the analog audio input is selected

HDMI AUDIO IN is enabled only when one of the HDMI inputs is selected

6.2.4 The OSD Menu

Parameter

Function

H POSITION

Set the horizontal position of the OSD (from 0 to 100)

V POSITION

Set the vertical position of the OSD (from 0 to 100)

TIMER

Set the timeout period in seconds (from 5 to 100)

BACKGROUND

Set the OSD background between 0 (solid black) and 8 (transparent)

DISPLAY

Select the information shown on the screen during operation:

ON - the information is shown permanently

OFF - the information is not shown

INFO - the information is shown for a few seconds

6.3 Connecting to the VP-441 via RS-232

You can connect to the VP-441 via an RS-232 connection using, for example, a PC.

Note that a null-modem adapter/connection is not required.

To connect to the VP-441 via RS-232:

 Connect the RS-232 9-pin D-sub rear panel port on the VP-441 unit via a

9-wire straight cable (only pin 2 to pin 2, pin 3 to pin 3, and pin 5 to pin 5 need

to be connected) to the RS-232 9-pin D-sub port on your PC

6.4 Connecting the VP-441 via the ETHERNET Port

To connect and configure the Ethernet port of the VP-441, refer to the ETHERNET

Configuration (Lantronix) GUIDE on our Web site:

http://www.kramerelectronics.com/support/product_downloads.asp

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 28 29

Sem comentários

Kramer-electronics VP-441 Manual do Utilizador Página 19