Kramer-electronics RC-8000 Manual do Utilizador descarregar pdf (Página 22)

Connecting Your Matrix Switchers

6 Connecting Your Matrix Switchers

This section describes how to:

 Set the dipswitches (refer to section 6.1)

 Connect a standalone unit (refer to section 6.2)

 Connect several units

with/without the remote controller (refer to section 6.3)

 Connect several units and the PC (refer to section 6.4)

 Connect a component switcher (refer to section 6.5)

6.1 Dipswitch Settings

Each 88 Series switcher includes a rear panel set of six dipswitches, as Figure

6, Table 7 and Table 8 define.

Figure 6: Rear Panel Dipswitches

Table 7: Rear Panel Dipswitches

Dipswitch # Function:

1-4 Set the MACHINE NUMBER (refer to Table 8)

5 Disables use of the IN SYSTEM button

(OFF = enables the IN SYSTEM button; ON = disables the IN SYSTEM button)

6 Enables a reply from the unit after it receives an RS-232 / RS-485 command

(OFF = disables reply

;ON = enables reply)

Table 8: Machine # Dipswitch Settings

DIPSWITCH MACHINE #

1 2 3 4

1 OFF

ON ON ON

2 ON OFF

ON ON

3 OFF

OFF

ON ON

4 ON ON OFF

5 OFF

ON OFF

6 ON OFF

OFF

7 OFF

OFF

8 ON ON ON OFF

1 With the 88 Series, you cannot connect two separate IN SYSTEM mode systems as one combined system

2 Helpful, for example, when using three composite video switchers to form one component video switcher

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 36 37

Sem comentários

Kramer-electronics RC-8000 Manual do Utilizador Página 22