Kramer-electronics SP-10D Manual do Utilizador descarregar pdf (Página 12)

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Connecting Your SP-10D Digital Video Processor

Figure 2: Connecting the SP-10D Digital Video Processor

6.1 Connecting a PC

You can connect to the unit via a crossed RS-232 connection, using for

example, a PC. A crossed cable or null-modem is required as shown in

method A and B respectively. If a shielded cable is used, connect the shield

to pin 5.

Method A (Figure 3

)—Connect the RS-232 9-pin D-sub port on the unit via

a crossed cable (pin 2 to pin 3, pin 3 to pin 2, and pin 5 to pin 5) to the

RS-232 9-pin D-sub port on the PC.

Note: There is no need to connect any other pins.

Figure 3: Crossed Cable RS-232 Connection

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 21 22

Sem comentários

Kramer-electronics SP-10D Manual do Utilizador Página 12