Kramer Electronics VS-1616A Manual do Utilizador descarregar pdf (Página 11)

Installing the Balanced Stereo Audio Matrix Switcher

6 Installing the Balanced Stereo Audio Matrix Switcher

To install the VS-1616A, connect the following

• Power cord

to the rear panel, as

required:

• Audio input and output cables

• Control Interface cables between switcher units, or PC (or other

controller), as section

6.7 describes

• Set the DIP-switches, as section

6.6 describes

• Set the system variables using the MENU function, as section

describes

Using the VS-1616A unit and/or other 16x16 matrix switchers in the

series

• A stand alone switcher (see section

, you can assemble the following kinds of systems:

6.2)

• A multi-channel audio switcher (see section

6.3)

• An expanded matrix switcher (see section

6.4)

• A system of interconnected switchers (see section

6.5)

6.1 Connecting the Balanced/Unbalanced Stereo Audio

Input/Output

This section illustrates how to connect:

• A balanced stereo audio input/output connection, see Figure 2

• An unbalanced stereo audio input connection, see

Figure 3

• An unbalanced stereo audio output connection, see

Figure 4

Figure 2: Connecting the

Balanced Stereo Audio

Input/Output

Figure 3: Connecting the

Unbalanced Stereo

Audio Input

Figure 4: Connecting an

Unbalanced Stereo

Audio Output

1 Switch OFF the power on each device before connecting it to your VS-1616A

2 Including the VS-162V (a 16x16 video matrix switcher)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Comentários a estes Manuais

Sem comentários

Kramer Electronics VS-1616A Manual do Utilizador Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Amplificadores áudio Kramer Electronics VS-1616A