KRAMER ELECTRONICS LTD. USER MANUAL MODEL: FC-31xl UXGA to DVI Converter P/N: 2900-000557 Rev 4
FC-31xl - Connecting the FC-31xl 7 4 Connecting the FC-31xl Always switch off the power to each device before connecting it to your FC-31xl. Aft
8 FC-31xl - Technical Specifications 5 Technical Specifications INPUT: 1 UXGA on a 15-pin HD connector OUTPUT: 1 DVI (On a DVI-I connector. Note
FC-31xl - EDID Factory Default Data 9 6 EDID Factory Default Data The FC-31xl is shipped with a fixed, factory default EDID as shown in this secti
10 FC-31xl - EDID Factory Default Data 1280x800 @ 60 Hz (16:10 Aspect Ratio) 1280x960 @ 60 Hz (4:3 Aspect Ratio) 1280x720 @ 60 Hz
FC-31xl - EDID Factory Default Data 11 (108-125) Detailed Descriptor #4: Detailed Timing (1600x1200 @ 60Hz) Pixel Clock: 162 MHz Horizont
12 FC-31xl - EDID Factory Default Data
For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We
FC-31xl – Contents i Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the Best Performance 2 3 Overview 3 3.1 Defining the FC-
FC-31xl - Introduction 1 1 Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creati
2 FC-31xl - Getting Started 2 Getting Started We recommend that you: • Unpack the equipment carefully and save the original box and packaging mat
FC-31xl - Overview 3 3 Overview The Kramer FC−31xl is a high−performance format converter for computer graphics signals with resolutions up to and
4 FC-31xl - Overview 3.1 Defining the FC-31xl UXGA to DVI Converter This section defines the FC-31xl. Figure 1: FC-31xl UXGA to DVI Converter #
FC-31xl - Overview 5 To adjust the vertical position (Vs) of the image, set the DIP-switches as required, according to the next table. In this sta
6 FC-31xl - Overview The SHARPNESS DIP-switch setting controls the phase of the sampling clock, as defined in the next table. 9 11 10 12 OFF OFF
Comentários a estes Manuais